with 2 Seagate populated 8TB plates. ran right away, even in Raid-0. Logs on as a plate with 14, bla GB. when placed with Robocoppy backup there from time to time outs. IC-box off and on again turn fixes the. Not so funny. after about 24 hours of continuous operation one of the two Platen is not recognized correctly. blue ready for operation LED does not go out, but to red StötungsLED. RAID-0 LED goes out. Computer does not see the plates. After resetting to single disk both disks are detected again - at least the blue LEDs stay on. Computer sees the disks but not (!?) Both plates are ok - hung directly on the motherboard do the best. Too bad really, the box is ok if they would work for more.