- Assembly: The most important thing in such films. Have already tried countless with my old DSi, with varying results. And I've found that a milimeter precise film indeed promises the best optics, but is simply not reasonable to install, without Luftbläßchen and dust under plastic and is incredibly hard abzubekommen back especially. At least that's with me like that. Here I can say that it is quite well resolved. The bottom foil is slightly smaller than the touch screen and therefore well be mounted. The upper bit more difficult, but also because of the fact that it is much larger and the entire upper part covered.
- AR coating: The second important reason for the scratch prevention for the purchase of such films. The antireflection succeed here consistently good, the displays are simply dull.
- Function of the touch screen: I have found no limitation for the operation, either by stylus even a finger. The surface feels just a little bit rougher by the matting.
- Scratch resistance: Can I not judge serious. So far, no noticeable scratches, but 2 weeks earlier without foil have left no scratches, so .. I think this is mainly due to the better Stylus construction of Nintendo.
- Image Quality: Here there is the only limitation, and the reason for the one star deduction: Down everything fine, no restriction recognizable. Above the same applies if you are in 2D mode. If you switch on 3D but the image is quite grieselig and sharpness suffers. Also, the depth effect is reduced, as a previous reviewer has noted. I have to / can the 3D rule now continue to turn up the same effect as to achieve previously. I have to collect a few more experiences that the top sheet will remain or not, after all, been playing all 3DS games on the upper screen, which is why a loss of image quality already hurts, even if I can play in strong light for now.
Highly Recommended Overall, for the price, especially because of the touchscreen foil. On the positive worth mentioning that in comparison to other providers two films for each screen are. If so fails the first assembly you have to re-order immediately. However, no other help in this process; no cloth or card for smoothing (I still have other film sets).
