The linkage is quickly assembled, provided that the pre-drilled holes and threads for the bolts fit together. This fits due to the powder coating is not always and you have to force the screw a little to their happiness. Then raised the substance and screwed to the bed. For this one works best for couples, as one of the second metal sheet falls repeatedly on the head. In substance are eyelets through which the screws are out, so that the fabric does not tear the thread. The first time one of the eyes is directly dropped ... just like that. To be fair, I must say that the seller has responded promptly. After I complained about the mistake of a new tunnel reference was immediately sent, without further prompting. With it went. However, one needs to have plenty of strength and patience. The length of the substance and the length of the boom is extremely tight, so you have to pull and tug until the screws fit. Fixed directly into the side boards, there is no Vorborungen. Therefore it is completely free, where you want to install the tunnel.
CARE !!! The tunnel will only work with a roll-up grille. Should his child would rather spendieren a frame rust, are the holes for the screws no longer on the higher side boards. It can no longer be fixed. Another drawback is the fact that, because the linkage is rigid, the side boards are pushed apart when fitting. Just in the center of the bed, where the frame is most flexible, which means that the support for the roll grille no longer fits. Say; the slats are no longer 100%. If the child does gymnastics around in bed, it may happen that by hanging the slats of the grate. Here I must also consider something clever, so my little one does not suddenly one floor is below me.
Furthermore, designed to put and insert the mattress much more difficult with tunnel than without. This should be borne in mind in any case.
Otherwise, a hot groovy detail that visually enhances the bed anyway.