Purchased for three months, used twice and excellent results. But in the third use an electrical connection problem occurred. It was necessary to move the feed wire close to the black mask of the resistance at the rear of the fryer to restore power. After removing this cover (careful, two screw heads are at the con therefore provide appropriate ends or a small screwdriver), obviously being the fryer OFF, it turned out that the two supply are connected son a block, which is provided with a pusher which is to be actuated by the cache once replaced. This block was so badly positioned. Problem solved but I'd passed me!
I read in a previous review that the fryer was made safe. To reset it exists on the black cover in the middle at the back of the fryer, a push of "restart" available with a thin wooden rod preferably to avoid any electrical contacts.