Since the cap but simply cut down and the metal is not completed, the cap of the silver coating Haltebreichs scrapes off the top Plug and underneath then looks out something brass-colored.
The pen writes itself very thin and "brittle" and the mine often does not roll clever.
But what bothers me the most is the really bad made lace. I had bought the pen to primarily back on the Ipad / Iphone and herzuwischen. By the metal threads of the pen wipes quite good, but the threads are jerk twitch through. In the beginning only slight threads have drawn, now I have real holes in it. To be fair, it must be mentioned that I sometimes take the pen in my pocket with to work here but not there is a tool case and if that does not cope with the threads, then a) is poor, and b) you should ne cap on have the pen.
Two additional remarks used rubber top. This is too soft, so sometimes not the display detects that you have pressed. In addition, you can see through the holes in the metal filaments meanwhile, that this has been first porous bodies and after 2 months.
Conclusion: I am massively disappointed and rate active on the purchase of this pin.
In the subject line of this pin is now "New upgraded version". That was not with me at that time. In this respect, some of it is possibly better now (if really good, the next question).