Good housing but woe to you buy the wrong motherboard

The case I really like, the hole next to the slot bracket has the perfeckten diameter for of these are mini PSUs, the cable for the button and the USB ports on the front is not as long as they fly around in the housing and there is a sheet of which you can attach an internal hard drive.

But there is one small catch. I have to the housing purchased a separate mainboard "H77N-WIFI" Gigabyte and thus a few problems.
The PCIe slot on the board ensures that the CPU further moves in the middle, the result: The sheet to which the disk is to be screwed, you have to the right place not to cover up the fan, which, the amount of the ago, so still just fits into the case, the hard drive I can nevertheless not screw in the vorgesehennen holes, because the fan protrudes 1-2 milimeter. (So ​​I'm going there probably 2-4 new holes not drilled so that the hard drive is located)
The ATX 24-pin power supply on the board is rotated so that is turned outwards my PicoPSU-90W, which is why I had to solder the connecting cable to the other side of the PSU to come with the cable to the existing in the housing bore, as Again 2-3 millimeter missing. ... Hopefully not scorched by the soldering at first operation.
The connections for the arrival swith are übrigends behind the ATX 24-pin power supply of the motherboard which makes it necessary also here to renew something ... the only thing was fitted straight away the screws were to attach to the motherboard and the front USB connection.

As a small abschießendes Conclusion I would recommend both parts together not only ;-).