The simple concept and the flexibility of the bed or beds (I have the 140er version of two 70 beds ordered) to a relatively low price initially convinced me, especially since this is for real wood and not about lousy pressboard as with the Most other offerings in the price range. When unpacking came however fast the disillusionment when I was set right by me oncoming wood chips out of the box. The processing is still very "easy", everywhere are still chips of wood away, the whole work seems totally "raw". I was already thinking whether I should accept the so considering the price and regrinding the wood itself decent (that would be a little time and work feasible in any case). But when I then test basis set up the bed, a further processing defect was found. The tolerances, has been worked with, are so high that it becomes a waiting game, to obtain a reasonably in itself straight, rectangular result here. This is just too much play in the compounds. In particular, the division of the long side into two parts becomes the problem. The leaves (which, incidentally, virtually no spring action have) to be used as an aid for alignment is also not an option as well here is to achieve not completely flush connection to the frame. So who is willing to rework the finish of the wood and the bed-consuming to align it somehow fix in this position and is willing to pay for the raw material currently 140 euros for 140 cm, can strike here. Or who does not wish to clean processing or a straight construction. I have now decided to go first for a bed of pallets. Here one must also first with the grinder ran, but I get the material for free;)