If you are using the router "only" as a wireless router (AP mode), then it saves the buyer Netgear to struggle through such useful functions such as QoS, Parental Control, page locks, locks Dynamic DNS services, VPN and IPv6. The surface has released version 1.0.0.52.
Even with the version V1.0.0.68 there is no change. Also an automatic update of the firmware is not possible.
IPV6 there in AP mode no longer, the router can also be assigned to any IPV6.
Since I'm used to from Apple's AirPort Extreme else.
So if you are blessed with a forced router you want to expand with wireless you need to build NAT via a network 2. if you want to use the functions.
After all, can be used as an additional LAN port WAN interface.
Has the USB interface on the network, unfortunately, only USB 2.0 Performace, at least in the HW used by me. I can not get the speed of the USB port on the PC with my USB 3.0 HDU.
With an Intel SSD can I get the USB 3.0 port (compatible with USB 3.0 SATA to USB Adatper) to 25MB / second (NTFS), cable 1000MBit.
At the USB port of my NAS I get to 102MB / sec (of possible 125MB / second). In both cases, the PC, via cable, connected to the R7500.
With the SW V1.0.0.68 performance has been improved by 60 MB / sec read and 40 MB / sec writing. That's OK for the device.
Nice for Windows users, they can access the hard drive via SMB.
Overall, the router is very warm, I would tap times to about 40 degrees Celsius.
At the current price of about 200 euros I can not recommend the device, unfortunately.
A router which is the price at the top of the Ending Konsumersegment must also offer opportunities that are there and can not come up with a surface offering 50 euros router.
At least in the advanced mode, the user should decide which functions he wants to use or not.
The router was at 14:11. exchanged due to the failure of sändigen 5GHz network.