o shower is not very strong, but better than nothing
o Included Perlator not the hit, was replaced by the same to me against a Neoperl
o Supplied weight ranges just like that. Did the old faucet with my screwed off and now works retraction perfectly (really fun)
- Assembly Instructions
- Braided hose smells outside, water tastes different than before
For installation instructions:
which conceals the fact that the connection hoses are only screwed into the faucet down and are not secured.
So if you are not careful when tightening the screw direction angle valve (especially the shower hose) rotating the top of the fitting out again. If one is true then opens the angle valves everything tightly, but as soon as you press the valve under the sink there is a fountain. Therefore expand the valve again had to determine exactly what had happened.
If one's white, you can observe it easily - but I was so far used valves from those below soldered copper pipes sticking - because such things can not happen
For shower hose:
during the assembly, I noticed already a slight Kuststoff-moderate odor. Although that is not so strong that he would interfere, but I taste comparison Before / After comes the fitting my impression worse off. I'll try the swap against another hose.
