I find class 1

My son is a Youtuber and he has his own gaming room. He loves everything that has to do with LED and so we naturally pleased about the LED STRIP 5 METERS huge. No sooner did this here, she was already taken and laid my son in fog.

=== The LED Strip Bar ===

The LED Strip bar is located in a brown cardboard box, where everything is neatly packed in there. In the box, of course, the LED is then strip bar. These were rolled up and lay neatly packed and absolutely unbreakable with cardboard in there. Overall, LED Strip bar are 5 meters long, have a width of 10 mm and a height of 2.2 mm. The LED Strip bar are particularly well suited for indirect lighting, because thanks to the flexible material on which the LEDs are mounted and its adhesive backing, the LED can be easily installed anywhere Strip bar playing.

At one end of the LED strip bar is a cable. Logically, because somewhere the power must come from somewhere, and this comes out of the socket. However, the cable has a sufficient length of about 2 meters, so that you do not need to install next to the socket, but still has a little leeway.

My son spent hours to look where he because most relocated. Most of all he would have spread throughout the room and everywhere, but rich 5 meter course not. He has had it lying on the desk, on the wall, to the cabinets along and simply was not conclusive, because where they are now to go. But eventually it was done and he has found the perfect spot. And on his large desk behind his three monitors along. There also looks really awesome from, for now they are still beautiful backlit. That which was from the 5 meters still on, he has placed along the wall. He has cut off none of it, but you cut the bar at any time and that with scissors after each third LED. But my son was of course not waste LED and all. But the cut is not a problem that we have already made with other LED strips.

Since my son again changed from time to time his room, we have the adhesive strip on the back is not used and the LED bar just so laid. You also will be really good and curls up not so that it is not noticed that the tape has not been used. But he may at any time lay down the LED bar elsewhere. But we tried it on a job times and stick them really really good. But one also gets dissolved again without any problems, but then I do not know if they would even for a second time sticking so well. But in addition we need still not have to worry.

After everything had been laid so as wanted my son just had the plug into the socket, so we could see how it looks. Fortunately for us, was the outlet right at the end of the LED strip. No sooner had the plugs in there also began the LED 's already starting to shine. The colors are really pretty strong, the whole thing is very colorful and it looks really great. I would have liked in my living room.
.
With the remote control, the lies, I can control the whole. My son can so lazy in bed and from there use the remote control. Naturally, you can change the colors on the one hand. On the remote control is located in the upper part of a range of colors. This looks at first glance little off, but you can set different nuances in all shades. In green, for example, a bright green, a darker green and so on. There are really many ways. Altogether there are 16 different colors. This I can let it shine individually or all at once, saying that they tackle in succession and always changing. Depending on your mood, my son has at times and even a wide variety of colors, because that has a calming effect.

In addition, I can also adjust the light intensity, so if I want the LEDs rather have very bright and a somewhat darker. I find great because it does not have to always be mega glaring in the room.

On the remote control, I have 4 color change programs namely Fasch, Srobe, Fad and Smooth. This means the following: Press the "Flash" White flashes, press the "strobe": high and low beam of a color button "Fade": Change all colors and button "Smooth": Slow Change the main colors.

The remote control has a total of 44 keys. I can dim the colors have 6 buttons for mixing your own color and storage have 6 color changing programs namely:

- "Auto" button: Switches 5 programs by automatically
- Press the "Flash" White flashes (changes Quick Speed)
- Button "Fade3": red, green and blue are light and dark
- Button "Fade7": Gentle gradient of different colors
- Button "Jump3": red, green and blue flashing alternately
- Button "Jump7": Seven colors flashing alternately

There are so many ways that you can bring the LEDs to advantage. The remote control can be operated very well and the buttons respond immediately to print without delay. Even from a little further away, I can control the LED strip and does not have to stand in front of it.

After I had read the customer reviews on Amazon, but I had a little panic because of the power supply. With us a 12 V power supply for the connection was to 230V. I could not complain about the power supply. My son had the LED strip on very often and the power supply was not warm. Nevertheless, I have replaced for safety reasons and bought a LED switching power supply 24V 3A 72W. So I am on the safe side. I would not know that it begins with my son in the room to burn. This may for some be a reason to complain, but a stronger power supply you can at any time buy extra to it and therefore it has managed the problem of the world. In addition, it is also in the description and you know what you buy. You can also shorten the LED strip, so they are not quite as many watts consumed, because each meter requires 7.2 watts. If you can count, you know well in advance that you need a stronger power supply if one has to use before every 5 meters.

It's also nice low power consumption, for what my son has anything to equipment in the room, you have but to some things even save some. If the entire 5 meters used with 150 LEDs, then the power consumption is gerademal 0.03 KW / h and therefore costs less than 1 cent per hour. That you can still cope with and the child has its pleasure.

At the processing so far, I also could not find anything negative. Everything is meticulously crafted, the LEDs are firmly seated in its place, there are no sharp edges or corners and the material is really nice flexible so that you can move the whole clean. If one of the power supply disregards what you can at any time be replaced by a better, I found nothing to complain about. We really ran everything perfectly and without problems.

=== === My conclusion

Personally, I have nothing to complain about at this LED strip. For the price you can not expect miracles, but my expectations exceeded this LED bar with wide. The colors are really pretty strong, I have many opportunities to adjust this and to dim, the remote control is functioning properly and immediately responds to pressure and everything was properly processed. when unpacking also no chemical stench came up. Clearly, the power supply to 12 V is perhaps not ideal and designed for all LEDs, but since you can either shorten the LED strip or order another PSU to what has more power. So we did it for safety reasons. I have nothing to complain about at the bar and forgive five stars.