Since I have the winter to clear a slightly larger area, I decided for sprinkling with salt for the Spreader. The assembly is quick and easy. Then filled the first time salt and put myself on the cleared area. First, put the set lever to maximum, because the salt but is somewhat coarser and drove off. Here, the salt was applied too thick, which is why I have the lever then adjusted to less. The first further meters, I was thrilled. Then the disillusionment. Of course, the Gritter is injected down wet in winter (from water or slush), which provides relatively quickly that the salt gets wet when pushing, and the ejection holes are glued fast. Finally, the salt just stepped out of two holes and a reasonable sprinkling was unthinkable. One has every few feet by plug the holes. But once wet, they are immediately again ...