Well, the device * came with firmware version 2.03 of 12.Mai2006. The latest version is (so far) 2.03 of 12.Mai2006 ... Nevertheless worked _after_ this "upgrade" everything perfectly.
* The device is supplied by Amazon hardware revision 3.1, the latest version.
really everything? Well, another previous speaker was right - I had the time being the WiFi channel of my router (also Linksys WRT54GL) Change 6. Why Linksys does not remain at its default setting (11) here is beyond me.
But if you heed these two things 1. Firmware Upgrade 2. WiFi channel 6 on the router (not the bridge, which automatically takes 6) Set it really is a great device. Have ever 100% signal between 2 different rooms and I can run any number of devices with Ethernet interface to the Bridge. Simply irish your switch or hub konnektieren, are joined at the then the individual devices (eg, Xbox, computer, Dbox etc. etc.).
That one for configuring the setup device (PC, notebook) must bring the same network as the Bridge, I do not see as a shortcoming. If you buy something like a "Wireless Ethernet Bridge", one should also not shy away from being short boot a virtual IP. The default IP of the Bridge is the way clear in the folder and the PDF (192.168.1.226), this can be changed during configuration. Login / password for the Web interface are admin / admin, which is also in the folder.
Functionality: Smooth 5 stars
Setup: 0 stars, absolute horror. Only by trial and error to figure out. Bad and embarrassing for a Cisco subsidiary. Had I but first read all the comments here and heeded, there would have been no problem. If you buy in the shop, I would probably have to try the Linksys Support.
Amazon: As always 5 star with 3 hearts;) Tuesday ordered, delivered Wednesday penny delivery, top!
