Installation good, but what to do with the cables?

The structure is very simple. First two rails must be screwed to the TV. The threads are standard in any television. Here, then, needs to be seen, which fit the many holes on the rails. The frame is attached to a wall. Plugs and screws are included. However, they fall from very large and the hole must be very deep. With two of these screws of fishing I have attached a kitchen shelf and some time ago, which weighed with contents at least 200kg. Finally, the TV is then secured using the rails on this frame and fixed with two screws. Now the TV is "rock solid" attached.

Positives:
- Robust screws and frame
- Spirit level for horizontal alignment
- Good Instructions

Important:
The television hanging so close to the wall that I could not use some HDMI cable. Here you have so buy cable with right angle plug.

I recommend to really think carefully beforehand whether this type of installation makes sense. When shell can already think about how you can hide cables and power supply in the wall under the plaster. Only then it looks really good on the wall. If you have not this possibility, you can possibly still hiding the cables in cable ducts. But then brings optically not really fulfilling.

Negatives:
Screws are slightly oversized. Here shorter and smaller screws have been enough. I am an industrial mechanic and know what I am talking about.

Otherwise, there is nothing wrong. From me 5 stars.