Is quite OK for the Raspberry Pi 2, but .....
NEW! Housing (OneNineDesign) for Raspberry Pi Model B +, plexiglass clear transparent transparent, ventilated, European production (Personal Computers) 3
NEW! Housing (OneNineDesign) for Raspberry Pi Model B +, plexiglass clear transparent transparent, ventilated, European production (Personal Computers)
The housing is of the material quality neatly, it is easy to assemble, but the fit is rather mediocre. This is only partly because I had the Raspberry Pi2 inserted instead of B + model. The furnace opening on the CPU is not quite right (which is why you should not install the CPU cooler on - that might be specific RPi 2) and a cooler on other blocks can be because of the "ceiling" in the housing does not fit. The housing bottom non-slip rubber feet, but it's a little warped, making it easy wobbles on a straight surface. The micro SD card clamped to a housing edge, if you put them in the slot. They no longer get out and needs to disassemble the casing. The lid is jacked up by means of spacers so that a circumferential gap is formed. This helps the ventilation, but it comes in return, of course, into dust.
Conclusion: enough for everyday use in completely and the RasPi2 also fits into it. But despite the price it's pretty warped.