Size: The case is about 17 cm wide and the body cross-section almost round. Diameter about 7.5 cm.
The term "Large" seems inappropriate to me. The case is only just so big that a pair of sunglasses as my "Half Jacket 2.0 Polarized black" reinpasst normal. I do not know what then should be "small" and what fits in there ...?
The exterior of the case is designed by a glossy black synthetic fiber that forms a fine pattern.
The Reissverschlussanfasser works fine optically sufficient and still makes a solid impression. The danger as cheap RVs that break very quickly, there is probably not here.
The Oakley icon on the upper lid seems to be made of plastic.
Due to the almost round body of the case, the glasses rattling of course something in case that's not a problem - after all, we have a crumple zone here, if the thin hard plastic case ought to break times.
The body is opened centrally by a largely peripheral plastic zipper (black). Here the body of even the two parts to jump quite far, which makes sense, because you can remove the glasses immediately without cumbersome only open with both hands even the case.
The zipper should be operated with a little caution, because he now and then hooked. But this is not abnormal.
In case the half-shells are lined soft and black - so you can safely clean pack his expensive glasses. The zipper ends were laid inside the case, which improves the appearance of the case to the outside. Since these RV-ends now apply logically inside (beads form), they are even with the lining material on sticks (two round spots). This prevents scratching of the glasses or the ends are optically carefully and technically well-glued.
CONCLUSION:
Legal chic case, which - because it is nearly round - very thick comes along. In the bag it takes up space unnecessarily. Too bad that this design goes beyond function.
Due to the shape of the case you can simply purely throw his glasses if necessary, if it is in a hurry.
The two half-shells that make up the body and held by a circulating RV, a piece of press far into each other - they can fortunately not further squeezing and thus provide enough stability.
The case is easy.
The brand you pay here otherwise quite expensive, I think. To my mind the good piece should cost 15 euros - this I thought based on the design and processing appropriate.