Mowing the lawn with a difference

So far I have only worked with petrol or corded mowers. For my new garden with approx 180sqm I now looking for a new lawnmower and as a Wired for me is not an option (I turning to the cable), I had a choice between a petrol and a battery-powered mower.

The battery with were really too expensive and above all to "new".
But with gasoline lawnmowers I had always only problems - and if it is only the empty tank or an old spark plug.
So I leave reviews on your purchase of Güde 320/25 carried away because of the many positive and have not bereuht far.

The device is, in fact, say processed "Inexpensive". Except for a few exceptions, the mower is almost exclusively made of plastic. Acts when more rustic models are accustomed to something cheap. But he does not rust. It also insulates the sound. This is a really positive aspect. It is light, agile and truly verhältnissmaßig quietly.
Unfortunately, the lower spar sits very shaky in the plastic receptacle. So I always feel equal to pull him out. The switching unit and especially the operating lever to my mind are a bit too unstable. The charger is similar to simple processes, but it seems to hold and is functional.

Battery I can not say anything bad. My 180m² I get loose. After being charged and well. The mower is supplied over the entire duration of about 30 minutes is sufficient power. The engine is sufficiently strong dimensioned in my opinion. Where my petrol mowers already walked slowly to his knees, the battery lawnmower comes through playing. On the other hand, he also has only 320mm cutting width. What should slow down there already.
The cutting width is also such a point. The 320mm are not much. My old land with about 450m² I do not mow it. But for small angled surfaces that may even have a slight slope, the mower battery is not least clearly superior in its price range because of its light weight.
The collector is just too small with its narrow 30 liters for my taste. I must teach at least 5x. But okay, - the composter's just around the corner.
Really bad I find the design of the height adjustment. You have to dismantle a wheel and then put the whole axis a breadboard further upwards or downwards. Then, the wheel must be screwed again. For me, the wheel has solved operational 2x after about 10 minutes. Consider me the fix possibly with thread lock on 45mm. If an improvement point.

But all in all I can see through the criticisms of time. I am glad that I chose for the Güde 320/25 and can recommend it. For small to medium sized green areas absolutely top.
Incidentally, you can almost all parts in case of a defect directly from the manufacturer inexpensive backordered. I think that's great.