Muck out

Long load times are often inferior to which cables or which are not designed for high load currents (to a small cross-section of the cable, etc). This device brings clarity. Once connected you have red-blue on black the truth itself: charging cable that just 0.2 A / 5 V transmit, Charger, which do not provide 5 V, USB ports, which are also unterbestromt and of course the beautiful things: Charger, the press with 9 volts and about cheap cable current maxima of 1.67 A, others that are specified with 5 V and 5.5 deliver (what controller based devices does not hurt, but it loads faster).

Loose connections can hereby also notice because the display performs felt 5 to 10 updates per second and therefore lighter wobbles are quickly visible.

Incidentally, 9V Charger initialize the switch from 5 to 9 V via the data channel: Output 1 is insufficient this further, Output 2. It is followed by a 9 V battery charger to a 9 V enabled device on output 1, one has on both outputs 9 V (clear) and thus can not charge more than 2 output a non 9V enabled device (!!). One exchanges, however, the connections, both devices get 5V allowed. Caution is otherwise obtained freshly baked electronic waste.

Ideal for all who see rather believe instead, and suspect.