After several weeks of delivery time I was able to pick up the Led tape at customs, since no delivery note was attached to the outside, for a part of 8 an extreme effort that would have seemed OK, although the publican when touching the roller plastic parts are broken out already, much to unrolled packaging, arrived home tape and connected to the sample, and lo and behold, it is lit, not very bright, but it lights up. So get stuck on the loggia on the steel panel and with soldering iron made the current connection, and to the great astonishment, it was nothing, ruled correct insertion. What happened? When sticking the contacts for Les band are canceled, so again the soldering iron in use. Then it became a problem, the conductive material at the interface is so thin that it melts before the solder, including the somewhat sticky silicone coating. After the third attempt, and now 9 centimeters missing I gave up and peeled the tape again. Next surprise, the adhesive dissolves relatively easily from the LED strip, but can not be removed from the ground, even with dilution must be extremely rub until all ingredients in resolution tape was removed. Positive: after a brief e-mail traffic, the money was refunded to me what went amazingly fast. Remove but no match for the effort and work at. Again proves true the saying: Web buys cheap buys twice. In this sense .......
