Robust material - not a cheap scrap - Easy to install

as I fell here ever quite evil on the nose, with a much more expensive chairs, I was a little skeptical whether wearing the quality satisfy the requirements.

After I opened the package, were all things clean and wrapped with protective film and clearly arranged in the box.

First, the 5-beam bogie. That is welded, can be seen at various welding noses but no degree, therefore no risk of injury. In order to make these welds disappear comes about a cover and the seams are no longer visible. Looks not nice, with such fran blessed welds! Ok the cover over it and is good. However, the coverage seems to be more so plastic default but they do their service.

Next, I attached the wheels under the bogie. 2 minutes work - which are simply clicks and keep Bombenfest! After that, the gas pressure spring is simply sunk into the slewing ring. So far without anything to screw it! Next, the seat placed on the gas spring; also without screws!

Thereafter, the seat back is introduced in the rear fixing of the seat. Also no screws. Also holds bombproof! After that, the headrest is pushed onto the backrest namely push down until it stops and then pull a little upwards. Depending on body size. I had to pull about 1 cm higher back at my 186 cm, the headrest. Also holds Bombenfest! The material has an overall heavy solid impression!

What is still missing were the armrests. So also no one confuses the armrests, are on the backs each tag with "left" and "right" glued. Now you might say, What for, but this looks like a blind man, the armrests are around? But I think that the stick as a good reason, since it with two left hands are also people and then give the instructions after the blame)

And here come the first time screws into play. For each armrest 3 screws are needed. Do not worry that are included. Also 2 Allen wrench! And also 2 spacers think that are also mounted in plastic and need. That was the only bit of a challenge where I have a bit longer.

1. I had overlooked the spacers (Ok I had viewed the manual sketches, should have noticed me but I did everything without the sketches assembled) Due to the lack spacers was the first mounted armrest pretty shaky and I really could not imagine, at the so far very good quality of the goods; which the deductions would come here of all places. Then I still had a look in the manual, and? In fact, there I saw the spacers. I had not thought about these two black things, and had been placed on the page. Now was clear why that was the wiggle. Unscrewed So armrest again and then put the spacer in between. Fuckelig bit because you have not so much space but after just 1 1/2 minutes and the spacer was installed. The same game is still on the other side and you're done was the chair then.

I have, of course, time taken in the assembly and tell me 1/2 hour it took me a total for the construction. Sure it go faster but to what end? Private incited me none, unlike in professional life; (

Oh, would also be mentioned that the armrests have a little play; Although the screws are bombproof palmed. I think that this "game" but is willed; so not too much tension is built up. Also you can admire the armrests, in height or even back to the depth adjust. There are two silver rotary switch, which one easily, which can adjust itself best position height on each armrest. Since I use this chair or stool only myself I do not need to change the setting and thus with the rotary switches wear would be entirely excluded!

The seat height can be easily adjusted via the gas spring and also here, for me at least, once set I do not need it to adjust again! I think with frequent adjustments, the material is fatigued sometime.

Next, there is the possibility of adjusting the backrest via a 2-th lever comfortably. I imagine the back to work at my desk so that the rest can not tilt backwards. This is a pleasant sensation when the back is properly supported. But if I want TV, I put back a little further back, so that you can comfortably sit back, because quite look "fixed" to the TV is not so nice, because you move so most times the cup of coffee or non-alcoholic beer and then you can lean back relaxed back.

Even a short teaser to the casters. I have with me a lot of carpets lie but anyway I can without any problems or major force efforts stride reset without it "slow" would. Clear here a higher frictional resistance is good but everything to "handlen" I now have degrees times down the chair in my kitchen where I lie a linoleum floor and again the chair makes a good impression. There are chairs that go smoothly only so over the floor and I think that is not without its dangers. This chair moves on PVC but slightly slowed down to control very well!

And after a word to the headrest. These can adjust the tilt angle. This is very pleasant when the back is flush with the backrest and also flat against the head on the headrest.

The seat cover also makes a very solid impression and processed especially clean. But since I use the chair for many hours a day, I have placed a cushion to protect the seat.

Should it come to a warranty claim, finally, one can not rule yes, I advise each store the original packaging! On my first TV chair here at Amazon, for believe 298 - bought was the after about 1/2 year scrap. The chair almost everything was provided with bolts and feet for the turntable and also precisely this had come loose again and tighten by the constant, the thread have then eventually turned around. Where I wanted to return the chair (Fa. Maxstore) should I pack the chair and he'd picked up. Since this but could no longer be taken apart and I did not have a huge box, was from the return nothing and I had a 298, - Euro stool for a ton. That does not happen to me again.

However, one could not compare the quality with this now purchased chairs. As I said in this chair 6 screws grade times required and is in an area where most likely loosen nothing. But just in case I am ready;)

I have this chair Topstar with brown upholstery and I think the looks really great. At first I wanted to buy it in black but with the flash range, recently I've been thinking too long and get with sorrow and distress even this chair. Fits really good to my oak furniture. Although of the Brown is now not much to see, because I've said as a pillow lying on.

My Conclusion:

5 stars for the material properties. Very stable material. I also hope durable!
5 stars for fast set-up time and the logical step by step installation.
5 stars for the well-being
5 stars for the fewest possible fittings
4 stars for the construction aids. (3 loose sheets)

I bought the chair for my bad back. The old chair from the hardware store, Ok indeed there but it was a chair where the seams were tearing from the seat cushion on and had no reasonable posture in the part. Perhaps one reason why I'm having problems with her back constantly. Although the DIY chairs had been 5 years under its belt and more to lengths was as the TV-chair, here's a link to the "cucumber" not because someone else falls for it!

So now I have but enough raving and perhaps one or the other helped to give an overview.

Greetings KH

PS .: And if again conspiracy theories are set up - No I am not an employee of, or the companies that offer this chair and who takes the time, just a look at my other reviews; That should clarify that I am a buyer and no seller!

Update: 17:09:13 - Still everything to the fullest satisfaction. No complaints !!!