Savings, wherever it was possible!

When we on 04/08/2013 discovered a puddle on the kitchen tiles, sinks the interior with all inlets and outlets but dry and the lint filter was clean, it was clear to us: the old AEG must have become leaky. Over 15 years she had on the drum. Proud performance! Automatically I looked BOSCH - since 1977 running my now 2 - but then had to search for the fill-in niche among the 59.5 cm wide WM.
Since now the Bauknecht was yesterday installed and connected yesterday, I sleep badly. Although classified as a "free-standing" behind a gap of 4 cm remains free on the wall. The fixed hose connectors are not covered by the plastic cover. Depth 56.5 cm? The plate has a side length of 50 cm. In the middle it is, because of rounding off the front, 2 - 3 cm long. The porthole is also before, probably also measured by Bauknecht in detecting the depth ...
Of course we can not be so let the machine. Not only that everything is narrower than 4 cm, could fall behind the World Cup, it would also form a dirty corner. But most of all, what does it mean? We'll have to buy the special accessories on which to place the worktop. What kind of a hassle, the cost is not even counting to produce a flawless look!
But Bauknecht has saved: 4 cm at the plastic cover, for maybe 0.50

Below, at the World Cup, there is a simple aperture, through which slot you have to carry a knife to open it. One sees the round screw the lint filter and search in vain the small tube to drain the remaining water. From my own experience I know that the amount of residual water is often not negligible and how annoying long the water sometimes still running, you want the course to catch before opening the lint filter. Here Wrong! Bauknecht recommends to push forward an absorbent cloth under the World Cup ...
What damage may occur well when pour freely in the kitchen or bathroom at pump failure eg 15 l be discharged liquor ...?
But Bauknecht has saved: the Gummischläuchlein water draining, for perhaps 1

The manual is written in general terms, moreover, so that it can apply to many Bauknecht Cup. I read again and again: presence of xyz depends on the WM type.

The description "1400 rpm adjustable or without Entschleudern" suggests free choice. In reality, there are only 3 set spin speed settings.

The supplied "Safety inlet hose" there is in online trading. Mandatory is the regular monitoring of his viewing window after every wash, can not be compared with my Bosch Aquastop hose, which is connected with a brass nut tight on WAS valve.
Meanwhile, we even suspect that this hose with which I the old replaced at the AEG my mother for security 5 years ago, the culprit was and we gave this puddle, because the security part of the tube (behind the sink back) already when you touch in all constituents disintegrated. We knew nothing of the regular check of the viewing window. Probably it would have the old AEG done even longer with a new hose, but with measly 1000rpm ...
To buy a new machine, was not a bad decision, but we had to choose this and thus have such bad luck calculated? Return? Gratuities, cost of disposal of the old, connection and adjustment of the new, all reel off backwards and pay again? Then the same thing all over again? Who else wants it? Perhaps the producers speculating on this cumbersome procedure with all the costs and save more fun at every whit? Therefore, dear potential buyers: we were already the unlucky ones, at least take advantage of our bad choice ...
One consolation is that BAUKNECHT KNOW WHAT WOMEN WANT ...