The ISC-GMBH (stands on the warranty certificate) However, it is not so. The guarantee certificate is indeed one should within 5 days of this report and that within 14 days, the interested but no one there. The do not react. Finally a part was not usable. What are you doing under the warranty or after repair is required. Can then help Amazon?
mfg hw
10/09/14
A good impression already makes it out of the box. Without lack 2 and 3 could be like them.
1 The fact that the engagement of the turntable and the conformity of the laser beam with the kerf are not really consistent, is due to secure the price.
2 The fact that the set screw (key 14) for clamping the turntable (POS 17) is too short and the turntable can not be tightened, is a high risk potential. The turntable is loose during sawing.
3 The handle (item 1) for operating the saw gets very hot. Boards 20x160. A cut every 10 minutes, as the need to be installed. The handle is even warm when you connect only the saw with the power and does nothing. I have a lot of equipment, but something was not there.
Because you immediately think of the notorious weak point, which should make the saw two months after expiry of the warranty useless.
I have the ISC GMBH (stands on the certificate of guarantee) mailed. Let's see what comes up. I will exchange for their reply the saw safely, in the hope that not all the handles are hot.
mfg hw