Solid machine

We have the machine for a week now in use. Delivery and pick up the old machine ran smoothly. The connection is to be managed by artisanal laity. Ready necessary to specify is a wrench for the height adjustment of the front (For us it was a 17er instead of the specified in the Ankeitung 13er), a large screwdriver for height adjustment back and ideally a cordless screwdriver to attach the lower screws on the countertop. The screws for the worktop have a roundish head, what with us that caused the top on one side of the flap screw touched upon closing and a deep scratch abbekam what one but not from the front looks. I have therefore replaced by own screws with flat screw head These screws.

The instructions may be printed slightly larger, the figures are sometimes hard to decipher. Important: Who in the old machine had a connection adapter at the end of the drain hose, this should pull before disposing of the old machine, because you need it for the new machine. If necessary, new sealing rings at the hardware store get our goods over the drain adapter.

The machine is very quiet, clean and washes can be operated without any problems. The closure of the door is a little stiff and could lead to a more rapid wear of the mechanics, or it is smoother over time. This, however, can be conclusively assessed only after prolonged operation.

Conclusion: Solid machine with small weaknesses, but they are not really tragic.