From material fro the fan is not so wertig as hoped and in contact, the device is a rather wobbly affair.
Commissioning is not a problem, you can turn on the fan, either by pressing a button at the bottom of the device or by remote control. The air strengths are divided into 10 levels, which you can use the remote control, as well as on the device itself, by pressing the one-off button longer switch. At level 1 you get a nice light breeze, and the operating noise of the fan is in the lower setting also nice and quiet, which for example is quite pleasant for the bedroom. The air flow itself is nice and evenly enough depending on the setting as already indicated by the slight breeze to a really strong airflow and a good cooling. Unfortunately, the individual increases in air strengths are not only these powerful, but also the operating noise of the fan is noisier. Quiet definitely be different.
The fan is adjustable in height, the height adjustment and tilt forward u. Back can be done only by hand. The rotational movement to the left and right can be controlled with the remote control. The fan has a timer function, the timer can be seen on 15, 30 and 45 minutes or 1-9 hours to set.
The base of the fan has a relatively small and compact size, which is quite advantageous and therefore you could almost everywhere stand the unit. The emphasis here is on but "could", because of the remote sensor is mounted below the device and only works with direct "visual contact" with the remote control. Thus, one can not simply the fan or the like behind a stool make, since it is controlled by the remote control otherwise not know what an absolute Fehlkonstruktion equivalent.
The cleaning of the device is simple, the plastic parts can be easily wiped off with a damp cloth and the air grille on the base can be easily cleaned with a brush.
The Dyson pedestal fan offers an attractive design, advanced technology and a pleasant and really strong airflow and cooling effect. The material, however, is likely to be high, the fan wobbles in contact immediately, the remote control will only respond with "line of sight" and in a incomprehensible way down to the base mounted sensor, the tilting movement can not be controlled with the remote control and with increasing air strength, the operating noise is also not necessarily quiet.
Currently, the price-performance ratio does not really fit together here.