Is attached to this wall mount yes very much has been written, which is why I am few, but confine substantial comments on a. -You Is a top bracket and unbeatable in this price range -Very Good workmanship, stable steel version with a thick, ribbed, black coating (paint) -Verstellmöglichkeit / Panning when hanging on the wall TV quite possible. -The Also allows good access to the yet possible side outgoing connections or angle connectors used. But is not too far from the wall. Depending on the degree of tilt and the use of screw attachment, the TV is down almost. -By The pivotal principle remain, suspended in the upper wall of the rail and in the lower arritierten carrier always unchanged vertically. It can be moved only screwed on TV U-spars. Screws for wall mounting very good, but at the dowels it is better to take better. There are only settled spreading cheap Fis..er dowel halfway. This should really nobody ever use, unless he really has a concrete wall ... -The Range of screws for attaching the arms to the TV is at first glance, although rich, but then impractical, inflexible or unusable. Here always a lot of VESA standard is spoken, but what this Flat size has rear mounting thread of M4 and M5 ??? M6 can I even imagine Samsung M8, but for this probably most widely used thread size are just 2 different lengths in! One is too short and the other logically much too long for the current F-series. Washers or PVC rings are only a strength and not enough here to keep you fit, multiply under way. Good for those who have an old range in the basement has ... or the hardware store just around the corner. -Beautifully Were still a few holes or punched holes (center) have been in the lower track, where you can assemble a few cable ties. Because the holder only once on the wall, you get bad pushed a between frame and wall. -The Spirit level can save the manufacturer actually ...
Have fun with the new, good support, but in half an hour, as the one or the other writes here, it's definitely not done. DERS hopping Guide