The absolute highlight, considering the old machine, the movable cutlery basket. I now get, depending on the type of crockery, about 30-50% more plates in the lower basket. That is for our budget, I have to fire up the machine only every 2nd day. This is an advantage which I will also feel in your wallet.
Where there is light, there is shadow.
I first unscrewed and secured what was to disassemble with normal tools of the old machine everything. (Thanks for the tip).
I needed it just clipped 2 galvanized angle. These are needed to fix the machine with the adjacent furniture if above is a granite slab.
The part number for the angle of a wooden panel above are shown here, but also are not included.
These pairs of angles is not enclosed in my view poor. (These are 1 cent items)
I also again opted for a model from Siemens, as I hoped to be able to use the same mounting points for the front. Not even close. I would have to use the machine precisely, must 3mm drill holes beside the old. Since has no screw. I have the offset with the adjustable feet.
The last little thing that has soured me installation, makes me doubt whether this machine ever built by the development department in a real kitchen.
Kitchen furniture since min. 30 years built with known dimensions and and usually placed in front of a wall.
I am lucky, located directly behind the machine an electrical outlet. I put into the outlet and push the dishwasher under the worktop, remains the cable supplied by Siemens 5mm face the other furniture. The safety plug is in the way. Cut plug and connect via Terminal is a viable alternative. But would not be if working for Siemens intelligent life form would have also thought about the installation.
The above may occur to the reader though as nagging. I need the manufacturer but impute the other inside such "intelligent" developments have taken place and that does not please me.
This is secondary to the detriment of Langlebikeit the machine, but at the expense of my primary purse and I am very particular.
