The scope of supply and the first milling tests

The package includes the following parts:
-. Makita Systainer incl fabric Inlet to take accessories
- Immersion Fräskorb (router)
incl. rip fence
incl. suction
incl. template guide large (about inner Ø 14.5, about outer Ø 16.1)
incl. additional bar handle (long handle as drill)
- Fräskorb for vertical milling
incl. leadership role for shaping
incl. suction
incl. template guide small (about inner Ø 8.5, about outer Ø 10.0)
- Angle Fräskorb (rectangular sliding plate)
- 2x open-ended spanner
- 1x centering Ø6 mm
- 1x centering 8 mm

The machine has a soft start - then the forward movement of the machine will be very limited and there is a tendency to underestimate the sweet, small and very quiet running router with up to 30,000 rev / min.

The consumption of the motor in the respective Fräskörben with toggle clasp keeps very well and fine adjustment of the cutting depth is quite feasible with a little finesse.

What I personally do not like so much the angle Fräskorb - the attached scale is very small and a joke. Well the main level numbers are on it (+ 45 °, 0 ° and -30 °) - which are 0 ° so much better covered than the normal Fräskorb. But the scale is much too crude and imprecise to meet the 45 ° or 30 ° exactly and rasterization - Wrong! The only advantage of the device - the fixation of the angle setting is, once fixed, bombproof.

The rip fence to Routers Module no dream, however, is indeed but quite usable.

Shortly to the collets - the 6 mm forceps is slotted four times and somehow looks better. The 8 mm pliers, however, is only one slotted - but do absolutely what they want - tighten firmly.

For further Soul on the comment-function.