But what ultimately for me is not at all the points 3 and 4: The film is to bring the best tricks without air or dust inclusions on. The static electricity always attracts dirt, which was not noticed in other films so. In addition, the film is slightly too big. Even if the lower edge is as much as possible pushed down to Home butts, sticks to the film about the speakers above. The air then under the edge of the rapidly complete sets with dirt. Also at the sides there are air under the sheet because the sheet does not want to keep 2D of the screen at the rounded edge (3d).
To use the film somehow I went as follows. Using a sharp cutter / carpet knife with a new blade (previously oil residues with alcohol removed) the film from behind! cut (top left and right).
Bathroom and wiped airing after showering in the shower without glued the film.
Why in the bathroom?
In order to avoid as much dust in the air!
Clean room + high humidity (binds dust) = Highest
I have now ordered a tempered glass to glue in China.
In my THL 5000 it worked 100%. No dust or air, perfect!
Glass perhaps also less static, which makes it easier.
Greeting, Starscream