Reflections are really very much reduced. Through the rough surface one sees hardly fingerprints, and the fingers glide with significantly lower resistance than the display (one "staring them" non-fixed).
But:
The image quality suffers, unfortunately, a mighty man among the film! Verschmerzbar would moderate the blur incurred. But much disturbing are the "rainbow spots" (I call now just so) to bright surfaces.
I'm guessing the rough surface acts like a loud tiny magnifying glasses that increase the RGB pixel - possibly the cause is also refraction in spectral colors. White areas do not seem to know - rather we see tiny dots of color sparkle that change depending on the viewing angle the color.
This effect I felt was so disturbing that I removed the tape again, and again the normal "reflective" film (2 x mumbi Screen Protector Sony Ericsson Xperia Mini Pro Screen Protector "Crystal Clear" invisible) have adhered.
Another tip for mounting:
Dust is your enemy! Necessarily (!) Work in a dust-free environment!
Thoroughly before gluing the display clean (Brillenputztücher or cotton towel and isopropanol careful with alcohol -. The denaturant may cause streaking.
The congruent positioning of the film is the most difficult part. Dry is hardly possible. I have therefore previously been wetted with distilled water, the display - it is possible to move the film to the film of water. Then, the film with a towel from the inside out firmly press (careful not to slide the foil again).
Protip:
Distilled water, therefore, because it is "clean" (dust, lime etc), and of course, very little - not flood the phone. I have 1 liter of water mixed in a spray bottle with about 2-3 drops Spühlmittel - which is also great for final cleaning of glasses.