Anchor Uspeed PCI-E to USB 3.0 2 Port Express Card card with 1 USB 3.0 20-pin connector (5V / 4-Pin Male Power Connector included) (Personal Computers) 5
Anchor Uspeed PCI-E to USB 3.0 2 Port Express Card card with 1 USB 3.0 20-pin connector (5V / 4-Pin Male Power Connector included) (Personal Computers)
Unpacked. Plugged into PCIE 16. PC started. Under Win 8, the card has been recognized and provided with the correct drivers. At least stand in the device manager USB 3.0 Hub. When I tried to update the drivers with the CD, has been advised of the optimum driver already installed .. Without electricity no devices are detected. Made power supply and the 20 pin cable for the front panel connected. Installation Front panel was possible with my body only with 2 screws. Since I still have quick-release fasteners is given the support. Test with USB 3.0 Stick shows that it was worth it. Read to 80MB / s, write to 25MB / s Incidentally, I have opened the Task Manager to see if my hard drive may come up against its limits. When writing the hard disk activity shows now and then 100% to red. Soon I test it with an SSD. Miracles can not be expected, of course. Much also depends on the hardware used. Fast USB 3.0 hardware accordingly more expensive. Conclusion: Fast delivery Good hardware anchor. (Under Win8 immediately recognized) Super upgrade path for older PC with USB 2.0 (best used in conjunction with the front panel) Cable Front panel is sufficiently long
Negative: A power adapter would be desirable. (Without electricity goes, s not)