Useful solution for repairing laminate and other damage

Having previously tried a repair kit from the hobby market, but was not happy because it looked when wet top, but after drying was something unsightly, I have now tried the repair. There are 10 colors, so that one covers everything from very light to very dark - and red tones (Meranti) are. It is interesting that you can mix colors. Little bits melt possibly also of a second color, then both heating with the unit together again and apply clean - possibly prefer something lush. Smooth with the spatula. Then similar to a knife or utility knife clean layering smooth. The better this succeeds, the cleaner does the repair site. The result was the first attempt not quite top but very good and significantly better than with the recently applied repair paste. My tip: before a little practice until you get the hang of.

Do you need larger quantities for filling damaged areas, if necessary, the use of a lighter is recommended. If the wax with the liquefied it can also mix more easily. The carpenter makes it exactly the same. Then the clean cut. If the wood grain has such as oak, the grain descendants with a non-water soluble felt pen, and possibly slightly with your finger over it, so that the lines are not as accurate but slightly blur and already sees the whole like grown oak. It is crucial for the success, to match the hue properly or to mix.

After I scored immediately after delivery at the first attempt, a much better result than the repair paste, and after I know the watch system, in principle by the carpenter who so holes hidden absolutely unknowable, I think this system for better impact and simpler in application.
Therefore from me 5 points.