The housing is generally very well made and really well thought out. The course layout is solved for loading and also for the heat dissipation very well (from all sides accessible, thermally sensible arrangement, removable motherboard ground). I could not at first thought that even the biggest cards and CPU cooler (180 mm!) Can fit. It feels like a HAF-X in cube form.
Although the drives in hotswap area forward get no active cooling, but I think that this area should not be too hot due to its location among the other hardware.
Good: The lid rubber buffers are inserted for installing a 200 mm fan. The Antec Big Boy fits eg. Only an angle and then with just two screws, but it fits. As long as one does not interfere with the sight from the top, it does not matter. Whether it is due to the Antec-specific holes, or on the housing, I do not know.
Now for the most criticism. If the dice not be hidden under the table with me, I would have given only three points:
The bay for the 5.25-inch drives is inaccurate. What is also intercalates, it does not complete flush, is so wrong (right about 2 mm deeper than the left, also the gap is much larger than the right to the left). A loosening the screw and Rumbiegen has brought nothing. The latest fall in the installation of two devices in right.
That would have can be solved manually if you could fix the equipment on both sides. Links can be screw and using a quick release. Law can only metal strips bend to increase the contact pressure. It is at these locations you could just come up with the idea themselves to drilling, but by the bending strip is at the relevant places no more material.
Certainly the case is not intended as a noble Designerdeko for the living room, but it may not be wrong.
It is correct annoying that you can not install a fan controller due to this quick-change design as the HAF-X. This gets right no real maintenance due to the short construction. I decline now to the control and tell myself to have saved no money.
Overall, this case is a good choice for a gaming PC in cube form, particularly because there is only one, are two alternatives with other disadvantages.
