This case is somewhat puzzling. At the time of ordering, this looked like in the product description on Amazon as they are today (with high support back - similar to the DONZO (redirect = true & ref_ = oh_aui_detailpage_o01_s00) After a few days, but the item was displayed like this:; ie = UTF8 & qid = 1418410593 & sr =. 1-11 & keywords = Kosee In this version I have received, the station also provide off the 2 bearing inserts are available:... a 8.5 mm and the other with 9.5 mm recording width The Z3 compact fits without shell without hesitation in this Doggingstation With Case does this holder under normal circumstances not because my Z3 is 11.5 mm thick with cover when you remove the receiving holder, is sufficient space in order to hoodwink the phone can, but because I found the next problem:.. the length of the receiving groove, is longer than that in the shell. After shortening the same Kosee with a Dremel, this now works as I expected. The aforementioned Donzo has made impossible by the spring contact with a utilization envelope. Therefore, I decided out of necessity for Kosee.