This is delivered in a cardboard box with a 9V battery and a detailed but unfortunately existing only in English Quick Start Guide.
With the thermometer battery weighs just 160 grams and can be stated very well in conjunction with the ergonomic design.
The measuring range is between -50 and +550 degrees, it is measured in 0.1 degree increments.
The accuracy is between +/- 2%, at 550 degrees, it is then so all right 10 degrees up or down within the tolerance range.
The measurement is performed in less than one second.
The three control buttons are used for switching between degrees Fahrenheit and, the on / off the laser for better positioning and activation of the display.
Note you should definitely the 12: 1 rule.
The measuring range is therefore one twelfth of the measuring distance, with 120cm distance ie 10cm in diameter.
Should keep the distance to the measuring point as small as possible to reach a point accurate measurement and resulting in higher accuracy you so.
I use the thermometer currently in my new to discover cold spots and hot spots in the heating pipe laying.
But it is also excellent in the electronics / PC range to, for example, waste heat streams to measure in housings or placing to fan optimally.
I am very pleased with both the ease of use as well as the real-world measurements.
Thanks to the thermometer, we have made a big step forward in the insulation of the heating pipes.
Also the price, I think, given the performance offered is appropriate.
I therefore like to give 5 stars for the 1080 Laser Grip Infrared Thermometer from Etekcity.
I hope this review could assist you in your buying decision ...