For machine: It's true a lot of what is available in recessions. The laser cross stands beside the 3mm drill bit, why not now, Bosch has reworked here reported the probably only itself and perhaps even the gods.
The "inaccuracy" of the borehole can be neglected home improvement, in my view, and who has a hobby, for a precision machine is required, the buy a Flott for 1400 Euros. I can not buy affordable 250 euros Baumarkts- device and then me complain about something. When properly adjusted, the speed of the material (supplied Table) there was with me no triangular holes and the hole with a 5mm drill was measured with the Messchieber, exactly. I am satisfied.
The laser cross is covered from one side, but it is inevitable. It can not sit centrally yes, because there is the chuck and the drill. So it has to sit asymmetrically to the axis and can be seen on one side only when the drill is lowered. Why complain to, because that can not work magic? How can we solve the other? In particular, in the price range? The crossing point is still visible here, if it were not for show 3mm next. That's the real problem.
The volume I imagined worse after the recessions. This machine may not be as quiet as the one Pinolenmaschine by the motor similar to a hand drill. For me it's definitely still in the frame. I do not bore you from morning to night.
One need only add the machine make and even sharp to look at, then the housing and the wheel is already dirty. Set the machine to the living room and you have no longer suck. the dust of hops alone plan. :-)
That also makes me angry. That must not be. As so often one has the feeling that manufacturers develop only in sterile laboratory and no longer know how the word "field test" is ever written. Or she does not want to know. Only from 1x to try the machine looked worse, as the old one for years. Wrong plastic.
4 stars that I would not have known what I should buy in the price range otherwise, if it were not for the machine and for the price-performance ratio. If the deficiencies had not been there, I would like to be paid at least a good hundred more for this machine.
For the wheel I have made myself a steering wheel knob turn. Doing great, you do not have nachgreifen.