The ABL Sursum (model: 1529160) is a safety plug of SCHUKOultra Pro Series (part rubberized, partly plastic) and accepts wires up 3x 2.5 mm² with two-component technology.
I use the connectors in the set with a coupling Socket coupling schiefergr. / Schw.1181560 with 2 K for a 15 meter extension cable with the heavy rubber hose line H07RN-F 3G Titanex 11 2.5 mm².
================================================== ==========
Here is the explanation: H07RN-F 3G 2.5 mm²
H: harmonized management
07: 450 Volt / 750 Volt rated voltage
R: natural and synthetic rubber
N: chloroprene rubber
Q: stranded, flexible wires
3: number of wires (neutral blue, brown outer conductor, protective conductor green-yellow)
G: with green-yellow protective conductor
2.5: Cross section in mm²
================================================== ==========
The ABL Sursum 1529160 is perfectly finished. Yes, perfect. That's really the case. The screw for opening and closing of the plug is a single 90-degree bolt (Phillips and quick release) as well as the screws inside are all cross-head screws. The insert is made Elamid, a high-strength plastic.
Since the set up of my Titanex line is 11 mm thick in the outer diameter, it fits easily through the rubber grommet of the plug. This is also large enough to accommodate cables with an outer diameter of 15 mm, depending on the manufacturer of the line set.
The Elamid-use offers more than enough space to use cable lugs / cable lugs or wire end ferrules, for example, what I have done.
Are the wires tightened and placed the bridge for cable strain relief, the connector is plugged together, the screw is rotated 90 degrees and the plug screwed onto the spout bottom. This compresses the tension springs on the cable gland and ultimately holds the cable.
My Conclusion:
So far I have increasingly set to plugs and sockets Merten, and only isolated products of ABL Sursum. The Merten plugs and couplings are very good, no question. But there is always something that is even better. My experience is that when I do something else - in the case even better - find out, I test it and then even more than take on more projects. Just because a product is good now, it should not remain forever the. I think this view are many share it.
Very high quality connectors, complaint-free processing, self-explanatory installation. Priced very well but when it comes to working with electricity, should generally no savings.
If questions remain, as do I connect (ie crimpe) or views and opinions would be exchanged, always in the comments so. The answer comes.
