The hotline of Panasonic had this error supposedly not known, so I did some research and found that many SAT receiver the new TV generation with high signal strength can have problems in the Internet. For me, the signal strength was all channels at> 99%.
By Axing SAS I am now - depending on the broadcaster - on to 70 - 80% down, and I have groped me slowly at the best value, ie, the signal strength should be as high as possible, but without audio dropouts. Thanks to the well to be dosed adjustment that was no problem. And lo and behold: Since then (which is now 1 month ago) there was not a single sound skips more. Nothing has changed on the signal quality that was even before that all transmitters (except the RTL Group) at 100%. I am happy!
+++ +++ Supplement
Unfortunately, the Axing my problem has not quite solved: The sound skips were the Axing noticeably less, but were still in front. The problem is - I believe - the Dolby Digital signal via DVB-S, which sometimes skips. This issue is also being discussed in various forums on the Internet. I have now switched to stereo. For me, this is not a loss, since I have no Dolby Digital system anyway. The Axing remains nevertheless installed to maintain the signal strength in a normal range.
