Axing SZU 3-00 SAT-SAS (0 5-20 dB)

Categories


  • Also helps with Panasonic  

    Axing SZU 3-00 SAT-SAS (0.5-20 dB) (Accessories)
    When my new TV from Panasonic, I had the problem that at irregular intervals, per television evening but at least 2 times, the sound for about 2 seconds exposed while the image normally kept running. The hotline of Panasonic had this error supposedly
  • Works great with Samsung C7700  

    Axing SZU 3-00 SAT-SAS (0.5-20 dB) (Accessories)
    Hi, I had been a 10dB attenuator to my Samsung TV, but lately I had more and more problems with the bit error rate and signal quality by 30-40%, especially in bad weather. Especially Tele5 HD and DMAX HD were partially error bit rates of 2000 and the
  • Lateral control is not working  

    Axing SZU 3-00 SAT-SAS (0.5-20 dB) (Accessories)
    The SAS can indeed screw good, but the lateral Phillips screw shows when unscrewing and screwing no effect on the signal level. Now the part goes back as defective and I look for another manufacturer.
  • Frequency: 11464 MHz, Pro7, Sat1, Kabel 1, Sixx - all in HD - not empfangabr  

    Axing SZU 3-00 SAT-SAS (0.5-20 dB) (Accessories)
    I had reception problems with my new TV from Grundig (50VLE930BL). Everywhere was shown that the signal strength at 90% and the quality is at 80%. In the above programs a lot then the quality just to 0. After I installed the SAS, I now have all 70% s
  • Dämper, not amplifier  

    Axing SZU 3-00 SAT-SAS (0.5-20 dB) (Accessories)
    I was amused by comments such as: ..I had after installation even fewer receive ..... as some are not well the meaning and purpose of a damper in the clear, the thing was clear: the works! Ideal for Samsung TV's showing at an excessively high input p