But what makes me suspicious despite all praise. In the Product Description 90 bar Burst pressure is indicated, as well as on the packaging. Also on the metal ends of the tube 90 is engraved bar. On the rubber tube itself but are next to the label, made in Germany and 25 degrees Celsius 10 bar Max. Whether it is perhaps to be a misprint? To the operating pressure, this may be not to act, because the specified with 30 bar.
The tube appears as thick-walled tube to be my age, is printed on the 20/60. Probably means 20 bar operating pressure and 60 bar burst pressure. Under heavy thumb pressure my old tube of new Scanpan not is something for, but so that I assume that he is thick-walled and therefore has to endure even more pressure.
Actually, I would have still gained no new hose when my front about half a year bought safety connection would not constantly addressed when my washing machine, water einlies. Due to permanent Abschrauberei the safety connection to turn it off, well the rubber seal, the inlet hose has been damaged a little. Because when I read the safety connection away, joined occasionally made a little water on the hose connectors shot. Only a new sealing ring would have as well done it, but because my old hose is already more than 8 years in operation, I then decided to buy a new one.
Today I connected the new Scanpan. Of course, only with the safety connection. Unfortunately, this also sparked in the new hose.
Thus has this part, on an error. When things go wrong after half a year, the whole acquisition is not worthwhile. Then I trust rather on a more stable supply hose. These safety connection I have purchased at times Pollin for 7.95 euros. Interested she was to have nowhere elsewhere. This heavy piece of metal that left a very strong impression on me, was also the engraving, 'Made in Germany', so I went out of quality. Because of course I do not know whether more expensive hose Place fuses, persevere for many years, I take the time being of a purchase of such parts, distance.
At first I wanted to so set the Wpro universal inlet hose with water stop and only good recessions, only 1 cm thicker than my Scanpan and would therefore squeezed on the way to my washing machine in some places too much, so I needed a good hose without waterstop , I hope that I have such a, with the Scanpan found.
