I was curious to see what I would get there for a cable. For the price I was not expecting much. But as others have already written, it would probably serve the purpose. It finally did not go to a high end application. The unpacked cable made initially also a very good impression. When plugging then bent initially the plug, because it is made of extremely thin sheet metal. Ok ... gently back straightened. I had to solve another next inserted RCA connection then a few days later. The cable had a little twisted into each other. When detangling I had then suddenly not only the cable in your hand, what I really wanted to solve, but also this one. But only the cable. The plugs were still in the receiver! I had exercised little train. How could that happen? Fortunately, I had none of the devices are turned on. So it came at least to cause a short-circuit on the open now obscured cable ends. Since the cable was now sowiso towards Zog I then times it was very carefully at one of the two remaining plugs and ... from. The cables are not soldered times in the plug, but apparently only slightly clamped. Thus, I regret to say that this cable, although surprisingly little cost, but unfortunately is still worth less because it has just not met the purpose.