I have a Vorwerk vacuum cleaner downstairs and got myself a cheap Progress vacuum cleaner for the first floor acquired because of the pesky alien smuggling. Here, however, only a narrow-chested Turbobürste was there. That is why I ordered the AGT-vacuum cleaner brush. If you have attached with some force the vacuum cleaner brush on the vacuum cleaner pipe, it starts. The air-driven vacuum cleaner brush is already running at low suction power. I only niederflorige carpets. These are well cleaned. However, there is, if you go against the grain, a troublesome resistance. The carpet is however thereby erected. It lacks a description of how you get to the cleaning openings. The turbine drive you have to press on the bottom, the elastic noses against each other and the small lid goes. In the brush itself must be made of the brush, the lower outer Pushing away the transparent Kunsstoffteil forward. The turbo brush is worth their money. They must not, however, be measured by an electrically driven carpet brush Vorwerk (since the brush will cost but even more than that of other companies in the whole vacuum cleaner).