As effective as USB support

.
Prerequisites -> Using the charger with a TIMETOP RECEIVER IQ adjusted to the battery of my Samsung galaxy S3. QI bought receiver on another site but here the same on Amazon.com:
Hossen load receptor Qi Wireless Samsung Galaxy S3 i9300 / i9308 / I939 (use with the wireless charger)
(Immediate placement adhesive against the battery without having to change the back cover because the receiver is very fine)

I only get that satisfactions:

-1- I loaded my samsung mobile with this wireless charger Timetop also load faster than traditional USB WIRED.

-2- The field induced through smoothly the thickness of the back shell and the silicone protective shell of my S3.

-3- A little 'beep' warns us when the mobile is placed on the plate and it is now well supported. The green LED then turn blue. It turns green when the mobile is removed.

-4- The mobile stops charging when the battery is full, but the charger maintains the battery to 100% (exactly as in ordinary wired load)

-5- The charger works equally well when plugged into USB (on my PC or my box for ex.) As sector (European plug unlike other brands for which you have to buy a US / Japan-adapter -> Europe). It remains in standby mode (green LED) pending receipt of the mobile.

-6- For those who would keep the charger in their bedroom at night, know that the LED (green or blue) is very discreet and does not light 10 meters around as some appliances on standby. And it does not sound likely to wake up when the battery is full. Unless the laptop emits himself a: +)

-7- The charger cable is kind of micro usb, so I can serve me in traditional power cable for my Galaxy S3. Length: 1.50m !!!
Can not be used as data cable.

-8- Finally, it produces no noise (vibrations, humming, whistling and others ...).

-9 Consumption measured charge: From 3 to 1 watt (declining more battery fills up the watts decrease) or 0.0005 for a full charge.
Consumption maintains battery at 100% measured: 0 watt (too small to be measured with my material)
Standby power consumption measured: 0 watt (too small to be measured with my material)

Small positioning council galaxy S3 (or S4) on the charger to charge OPTIMAL (lossless): make sure that the mobile is parallel to the charger, and the top of the mobile at the same level as the top of the charger (the LED must be visible top view)