Although it's convenient that a rubber connector plugged into the back (in white), because the device is filled with water but the spillover can if you're a little too peppy pure puts the bottle which a security risk. I initially did not respected it and I do not often times the water spilled over. A fixed cable would be as safe even if one finds a practical to his own dranmachen.
The fact that my water is spilled over, water is running behind the front display, I assumed that it actually logically be splashproof. Yesterday it then continuously provided the temperature down, so a short circuit through the water on the down button. A few cuts in the film have derived the water that the unit was broken but still. Somewhere is still water in it or some blown.
Of course, the logical sequence is that you only purely represents the vial and then fills up the water, then nothing goes on. But even here one can something go wrong. I ordered one again and will this time as far as seal it comes and hope that I can find a good replacement in the near future. Despite idle protection I can not recommend it as it has no splash, then bring rather the kettle Philips HD 4685/90 who manages a pint in under 40 seconds 40 degrees, but it can not keep warm one incomplete milk.