Commissioning could not be easier. You put the hard drive to the SATA port down (gently!) From above into the opening of the dock until it is safely in the SATA port of the station. After you close the station to the mains and using the included USB 3.0 cable to the computer. Switched it is by touching the Power button. For me it has been recognized under Windows 7 immediately and was ready for use. Does the computer does not have a USB 3.0 port, the docking station can be connected and used via USB 2.0, but with significantly lower then data transfer rates. The Power button lights up blue when a USB 3.0 and USB 2.0 connection at a white. For data transfer, he blinks. If the station 10 minutes of non-use, it automatically goes into PowerSave mode to conserve energy.
The processing of the docking station is perfect. The outside is made of matt black plastic, and all connections are meticulously crafted and can be combined well and safely. On the bottom four rubber feet ensure a safe at all times and not slip. The function is impeccable. With my two hard drives I could make a considerably higher data transfer, as I previously knew the over USB 2.0. Therefore, there's me and 5 star.