I have the printer since 27.März.2008 in use. There are sufficient drivers for Windows and Linux, which has very ertaunt me. Be it (import PPD file and it works) for Linux, or for Windows XP or Vista. Of course you can with several printer languages and print these I have not used because the printer with the supplied software works great. I always print in the toner-saving mode and am impressed by the print quality. The print quality is unique, much better than the quality of the HP Office printer in my company, which costs around up some more. At that time I wanted to buy more memory for the printer, however, this is unnecessary. Had never problems with the printer, it is memory, with the sheet feeder or anything else. A device which you hinstellt and used. Very reliable. I recommend everyone a longer USB cable to buy, as no printer cable is included. In addition, I print on pre-punched paper, you'll save the punch later. Funtkioniert without problems, with other printers can cause problems punched paper. If you print should be careful if you really want to print the document because the printer in 6 seconds is not even willing to spit out pages and full throttle. With my old printer that had to be turned on and then printed it, waited a few minutes and had the document. With this printer, you can switch the printer, prints, go to the printer and has the finished document in hand. If you want to cancel the print job that is pointless, because the printer has already done the job due to the high speed. WHY? On the one hand until it begins from the short startup time of 6 seconds to print, on the other hand about 20 pages per minute print speed.
CONCLUSION: A reliable, fast printer with the lowest cost according DIVERSE test sites on the net (as of March 2008). Stand up and use the same. Driver for various Windows and Linux versions available