Ideal for all those a hardcase is too expensive. I have a Lumia TZ100 (Bridge Camera) and has just yet fitted. Awkward was the alignment of the camera in the case: The internal flash is queued at the top of the lens-ring and on the bottom is no abutment at the camera. My remedy: A small plastic strip with power strip attached to the camera and thus was the case lens parallel to the lens. With the included foam materials that was not possible. Underwater, it is difficult to make adjustments to the camera being switched on and off and zoom can accomplish. While snorkeling, the display was difficult to judge by is my series failed because bubbles had gathered at the front of the lens and the camera had then focused the bubbles. That was not to be recognized by the snorkel mask and the display.
One point deduction because of fiddly orientation of the camera in the case.
All in all: well made and absolutely tight (at least for snorkeling). My camera is still intact even after several hours of snorkeling gears.