There should be a new Monitor ago, as soon as possible. That can not be so costly Being I thought.
The new monitor should be slightly larger than the old one: ie 24 inches
It should again have the image ratio of 16:10, because 16: 9 is unfavorable for Cad image editing and Office
Then have a good height adjustment: as low as possible so that the eyes do not dry ...
Pivot function had not, but handy if you need to terminals times
Remain affordable: max 300 Euro
And have good reviews: there is, for example, at some PRAD with above features which have performed well
In addition, the device should have gotten on Amazon & Co no serious negative reviews: But that was a problem
Finally, out of 10 devices I stayed on the shortlist had only this one monitor left!
I hope that my, complained of the buyers at the monitors also well tested defects as:
- Headache by flickering LED screen lighting
- Wrong color illustrations
- Uneven illumination (black image is gray in the corners)
- Incorrectly assembled housing (final assembly by the customer)
- Failure after a short period ...
spared.
After weeks of intensive use currently has two I'm at least by this monitor still excited :)