I bought this mobile air conditioning unit, as it this year (as it is easy at night no longer cooled a week in June) in our maisonette was simply too much to bear at the top. A Sleep was hardly possible there. Looking for a good air conditioner, I decided for the Remko MKT 250 S-Line. I have read some reviews, and the only negative thing frequently mentioned times, was the volume during operation. But since I was not going to let the unit go through during the night, but rather wanted to cool the room in advance, and then wanted to switch off the device, it was not a knock-out criterion for me. The equipment was delivered by a forwarding to the first door. A pallet (Transport) So there was also. Then the nice truck driver disappeared with their trucks, and my friend had the 40 kg of highly wear (2nd floor). Was feasible, the single woman or any person who is not 40 kg braces regularly, but note that they can organize appropriate support should. Design of the device was very simple and intuitive. But: when we wanted to put the exhaust hose to the window jet in a hinged window, we noticed: the window nozzle (the top front of the tube) is much too wide to be plugged into the still very narrow window gap (on tilt) can. (Possibly located on the energy efficiency design that the walls wider, and the window is located deeper. In other windows that is probably not a problem). So we RECOURSE no alternative than either completely open the window or switch to one of the skylights. Since I do not think both entirely satisfactory (fully open window seems to uneconomical - the Dachfesnter is not located in the proper location in the room, and so the cooling will take place on bed / sleeping area instead of later as if we could go to the bottom hung windows) have I unceremoniously Remko respect. This problem contacted. I had hoped that there nachzukaufen another window nozzle. I put on the website Remko this question using the contact form - and get little later a really detailed and personalized answer to my question. This prompt and very friendly service I liked - even when I was told by Remko that the width of the window jet unfortunately can not be changed, because only this opening ensures the evacuation of hot air. If one were to use a schalere nozzle, the hose at the other place would have to be the thicker. As this is now at another air device manufacturers and their models, I do not know. However, I have an acquaintance a very old air conditioner (with use of water, therefore, may not be comparable! A Delonghi Pinguino) seen in use where the window nozzle was about half of the Remko nozzle, so that they really narrow in a window has passed. However, we have now decided to buy a cover for the window (to see Amazon with the keywords 'air conditioner' and 'window seal'), so that we can open the windows, insert nozzle and yet have no open windows. Let's see how that works out. All in all I am very satisfied with the device: it is of course noise-intensive, if you let it run at the highest level. But I do not feel the noise as overly loud or unpleasant. The various programs are intuitive. The remote control and the ability to TimeSet I have not tried because I do not need them. The cooling performance is good. Safely in confined spaces best. We have a very large range (duplex without doors), and of course it takes longer. But it's definitely much cooler than without air conditioner. Moreover, because the device is mobile, it can also easily in the room (when the window situation permits!) Be moved and used, so that even large areas can be cooled down!
Conclusion: I get the device 4 stars! One star deduction because there is no other option of window cleaning, and we first of all have had to acquire the window seal in order to use the device on of our favorite place can.