In total over priced .....

... But let's start with the negative points.
Packaging was like already criticized by other very poor for this high weight, in my case, everything is but went well.
Of course, not forged, but that would also be another class (well priced).
The opening width of the jaws is not 165mm as shown, but only about 155. But personally quite sufficient for me.
Sorry, no guidance on dovetail, but still going well in parallel.
Type of construction, the tread of the movable member is open conditionally. As I loop many workpieces, this greased tread dirty quickly through the swarf. I guess I'll have to clean as often and greased.
The finish leaves something to be desired, fragmented partially starting, probably was not degreased thoroughly enough before varnishing.
Even if the vice is mounted at the very edge of the bench, no long vertical part can be clamped, as the fixed jaw is still about one centimeter behind the edge of the workbench. Is so only if the vice is rotated slightly. Or is something interposed (additional baking). In my view, a mistake in the design.
The lock against turning is sometimes overwhelmed with greater lateral force (long clamped parts), and vice turns anyway with. The screws provided with Querhebelchen are anyway some hakelig. Possibly I replace the. nor against M12x40 as Allen screws, and work as with key

But .....

For professionals likely to be insufficient. But home improvement thoroughly recommended. Large and massive. The jaws close and good parallel. Power in a sum indestructible impression. And at this relatively low price. So my opinion is worth more than the price suggests. This article I would also bring me back.