The table is broken down into individual parts, delivered in a well-padded package. The structure is achieved by using the clear and consisting exclusively of pictures assembly instructions in about 10-15 minutes. This is so simple that it should be easily mastered by anyone. All major parts are given by (easily removable) stickers with numbers, so that no confusion is possible. The need to build tool (a fork and an Allen wrench) is. It is recommended, however, to use its own open-end wrench (size 12), because the enclosed is very flat, so that the mounting of the wheels can be a bit fiddly.
Function (4/5):
The table can be extend to a maximum height of 87 cm (from the floor), but it starts to become unstable, which manifests itself through a shaky and slightly sloping tabletop from a height of about 80 cm. I would therefore not permanently burden the table above this height. But since I anyway had this before, I do not mind this circumstance. Below this level the table is stable and complies with the duties imposed on him (in my case mainly carrying a notebook) well.
The tabletop can be rotated by 360 °, however, the table tilts from an angle of about 90 ° between the table top and foot under greater stress (Notebook) to. A points of the foot is parallel to the bed / sofa and turning the table by 90 ° thus not possible. Tilting the tabletop work without hesitation. The adjustment of each part using the screws goes in each case slightly out of hand.
Additionally, the table underneath the tabletop a cable guide (realized by two plastic hooks) so that can be one or two cables run along the metal rod. This is handy, because as no cables are in the way.
Due to the flat design of the foot can this fit easily under the bed or the sofa. However, the disadvantage of this design is the use of small wheels, which ensure that you can push a little cumbersome to unebeneren substrates the table.
Processing (4/5):
The build quality is reflected in the price reasonable. All parts fit into each other during assembly clean and do mostly a good impression. But two things I noticed negative: So in my copy, the heads of two plastic screws were slightly deformed. This one notices, however, only at a closer look and it does not affect the function. Furthermore, the welds on the foot are unclean, so that there is a visible gap between the metal parts.
Conclusion:
I would recommend this product to anyone who wants a cheap coffee table and can live in the processing with the limitations I mentioned in the function and small weaknesses.
