Calor has managed the feat to get rid of the iron wire, wire sentortille and eventually exasperate us. The system is well developed puisquà lusage, 30 seconds maximum before recharge of use are usually sufficient for several passages; Time to reposition the garment, it puts the iron on its base and the charging is almost immediate (3 or 4 seconds!). If lon didnt repositioned the iron on its base after 30 seconds a slight "beep" in an aggressive nothing, we inform. Lenclenchement on the base is very easy and does not require that it sappliquer to be perfectly positioned. Simply place the well on the base board help of a screw system quite safe and finally released from the damn thread what comfort! Javoue the plastic fastening system ma, at first, seemed very little quality. But lusage it fulfills its office and the base is firmly secured to the board, while remaining adjustable in order to choose "his" best position for the repositioning of iron. However, we must admit to lose up on the board because the base is quite cumbersome and may hinder to return large clothing or linens. For the rest, this is a classic iron with a good sole (as always with Calor) but steam output remains low compared to a steam plant, also super dry function is essential for some clothes. The reservoir is limited and will often add more water. This operation is delicate enough dailleurs because of a narrow fill hole was quick to put water everywhere, all the more that Calor has deadlock on a container spout pouring a bit stingy! Another grievance malfunctioning nozzle on the tested model, drooling over that he does spurts that remains troublesome when it comes to get rid of a creases. Conclusion: A really interesting innovation that it would be good to transfer to a central steam there, it would be perfect!
